| Model |
P-130 |
| Description |
P-130 like its predecessor (P-125) is a
high-speed photodetector followed by a low-noise transimpedance amplifier. The
photodetector is optimized for 1310 nm input wavelength. Maximum data rate is
12.5 Gbps. This unit is intended for laboratory use. P-130 is powered by
a wall plug unit (included). Data input is through an FC connector for
either singlemode or multimode input. The electrical port is an SMA type
matched to 50 ohms.
|
| Delivery Time |
1 to 4 weeks ARO |
| Contact |
Email us at
info@californiascientific.com
or
call our office at (408) 247-9660 |
| Specification | Download data sheet in PDF |
| Summary |
| Input Connector: | FC |
| Output Connector: | SMA |
| Input Fiber: | 50-mm multimode |
| Power Consumption: | 240 mW |
| |
Min |
Nominal |
Max |
| Wavelength (nm) |
950 |
1310 |
1390 |
| Bit Rate (Gbps) |
0.001 |
|
12.5 |
| Sensitivity (dBm) |
|
-15 |
|
| 3-dB Bandwidth (GHz) |
|
8.5 |
9.5 |
| Rise/Fall Time (ps) |
|
37/45 |
|
| Saturation Input Power (dBm) |
|
0 |
|
| Conversion Gain (V/W) |
350 |
440 |
|
|
